December 2, 2022
  • December 2, 2022
  • Home
  • Shaft
  • Global Automotive Balance Shaft Market Report to 2030 –

Global Automotive Balance Shaft Market Report to 2030 –

By on July 7, 2022 0

Dublin, 07 July 2022 (GLOBE NEWSWIRE) — The report “Automotive Balance Shaft Market by Engine Type, Manufacturing Process, Application, and Sales Channel: Global Opportunity Analysis and Industry Forecast, 2021-2030” has been added to from ResearchAndMarkets.com offer.

According to this report, the global Automotive Balance Shaft Market was valued at USD 10,489.0 Million in 2020 and is projected to reach USD 16,691.3 Million by 2030, registering a CAGR of 4.9% by 2021 to 2030.

The balance shaft is a mechanical part of a vehicle’s engine that reduces vibration by canceling out-of-balance dynamic forces. It is used to compensate for vibrations in motor designs, which are not inherently balanced. It helps optimize vehicle weight and improve fuel efficiency. Using an automotive balance shaft in a vehicle provides low specific fuel consumption, high thermal efficiency, energy savings, and improved passenger comfort while reducing noise, vibration, and harshness of the motor.

The balance shaft can be made using the forging or casting technique. In the forging process, the material is shaped with electric hammers, presses or special forging machines or with the application of localized compression forces exerted manually. Forged components have good strength and toughness; therefore, they can be used reliably for highly stressed and critical applications. In the casting process, metal is heated until it melts, then the molten or liquid state is poured into a mold or container to create a balance shaft. The casting process is used in a wide range of components that are too large, complicated, complex, or otherwise unsuitable for the forging process.

Rising demand for inline 4-cylinder engines, increasing adoption of fuel-efficient low-carbon vehicles, and increasing need for vehicle engines with reduced noise, vibration and harshness are the driving factors. which drive the growth of the market. However, increasing adoption of electric vehicles and increasing sales of luxury vehicles and sport utility vehicles equipped with high-performance engines are the factors hampering the growth of the market. Rising demand for passenger cars from emerging countries and technological advancements are the factors that are accelerating the growth of this market.

The automotive balance shaft market is segmented on the basis of engine type, manufacturing process, application, sales channel, and region. Inline 3-cylinder engine, inline 4-cylinder engine, inline 5-cylinder engine and V6 engine are the different engine types covered in this study. It provides details on the various manufacturing processes such as forging and casting. The application segment included in the report covers passenger cars, light-duty vehicles and heavy-duty vehicles. Additionally, it summarizes the details of revenue generated in regions such as North America, Europe, Asia-Pacific, and LAMEA.

Key Benefits

  • This study presents the analytical description of the global Automotive Balance Shaft market analysis along with current trends and future estimations to depict the impending pockets of investment.
  • The Global Automotive Balance Shaft Market Opportunity is Determined by Understanding Profitable Trends to Gain a Stronger Foothold
  • The report presents insights related to the Global Automotive Balance Shaft Market key drivers, restraints and opportunities with detailed impact analysis
  • Current Automotive Balance Shaft Market is Quantitatively Analyzed from 2020 to 2030 to Assess Financial Proficiency
  • Porter’s Five Forces Analysis Illustrates the Power of Buyers and Suppliers in the Industry

Main topics covered:

Chapter 1 Introduction

Chapter 2: Executive Summary

Chapter 3: Market Landscape
3.1. Market definition and scope
3.2. Main findings
3.2.1. Main impact factors
3.2.2. Best Investment Pockets
3.2.3. Best Winning Strategies
3.3. Porter’s Five Forces Analysis
3.4. Market share analysis, 2020 (%)
3.5. Market dynamics
3.5.1. Drivers
3.5.1.1. Increase in demand for inline 4-cylinder engines
3.5.1.2. Increased adoption of low-carbon, fuel-efficient vehicles
3.5.1.3. Increased need for vehicle engines with reduced noise, vibration and harshness
3.5.2. Constraints
3.5.2.1. Increased adoption of electric vehicles
3.5.2.2. Increase in sales of luxury vehicles and sport utility vehicles equipped with high-performance engines
3.5.3. Opportunities
3.5.3.1. Increase in demand for passenger vehicles from emerging countries
3.5.3.2. Technological advances
3.6. Covid-19 impact analysis
3.6.1. Outbreak evolution
3.6.2. Microeconomic impact analysis
3.6.2.1. Consumer Trends
3.6.2.2. Engine Type Trends
3.6.2.3. Regulatory trends
3.6.3. Macroeconomic impact analysis
3.6.3.1. gdp
3.6.3.2. Import/export analysis
3.6.3.3. Employment index
3.6.4. Impact on the Automotive Balance Shaft Industry

Chapter 4: Automotive Balance Shaft Market, By Engine Type
4.1. Insight
4.2. 3-cylinder in-line engine
4.2.1. Key Market Trends, Growth Drivers and Opportunities
4.2.2. Market size and forecast, by region
4.2.3. Market analysis, by country
4.3. 4-cylinder in-line engine
4.3.1. Key Market Trends, Growth Drivers and Opportunities
4.3.2. Market size and forecast, by region
4.3.3. Market analysis, by country
4.4. 5-cylinder in-line engine
4.4.1. Key Market Trends, Growth Drivers and Opportunities
4.4.2. Market size and forecast, by region
4.4.3. Market analysis, by country
4.5. V-6 engine
4.5.1. Key Market Trends, Growth Drivers and Opportunities
4.5.2. Market size and forecast, by region
4.5.3. Market analysis, by country

Chapter 5: Automotive Balance Shaft Market, By Manufacturing Process
5.1. Insight
5.2. To forge
5.2.1. Key Market Trends, Growth Drivers and Opportunities
5.2.2. Market size and forecast, by region
5.2.3. Market analysis, by country
5.3. Foundry
5.3.1. Key Market Trends, Growth Drivers and Opportunities
5.3.2. Market size and forecast, by region
5.3.3. Market analysis, by country

Chapter 6: Automotive Balance Shaft Market, By Application
6.1. Insight
6.2. Particular Cars
6.2.1. Key Market Trends, Growth Drivers and Opportunities
6.2.2. Market size and forecast, by region
6.2.3. Market analysis, by country
6.3. Light commercial vehicles
6.3.1. Key Market Trends, Growth Drivers and Opportunities
6.3.2. Market size and forecast, by region
6.3.3. Market analysis, by country
6.4. Heavy duty vehicles
6.4.1. Key Market Trends, Growth Drivers and Opportunities
6.4.2. Market size and forecast, by region
6.4.3. Market analysis, by country

Chapter 7: Automotive Balance Shaft Market, By Sales Channel
7.1. Insight
7.2. Original Equipment Manufacturer
7.2.1. Key Market Trends, Growth Drivers and Opportunities
7.2.2. Market size and forecast, by region
7.2.3. Market analysis, by country
7.3. Secondary market
7.3.1. Key Market Trends, Growth Drivers and Opportunities
7.3.2. Market size and forecast, by region
7.3.3. Market analysis, by country

Chapter 8: Automotive Balance Shaft Market, By Region

Chapter 9: Company Profiles
9.1. American Axis and Manufacturing, Inc.
9.1.1. Company presentation
9.1.2. Key leaders
9.1.3. Company Overview
9.1.4. Operating business areas
9.1.5. Product portfolio
9.1.6. R&D expenses
9.1.7. Company performance
9.1.8. Key strategic moves and developments
9.2. Engine Power Components, Inc.
9.2.1. Company presentation
9.2.2. Key leaders
9.2.3. Company Overview
9.2.4. Product portfolio
9.3. Hirschvogel Group
9.3.1. Company presentation
9.3.2. Key leaders
9.3.3. Company Overview
9.3.4. Product portfolio
9.4. Linamar Company
9.4.1. Company presentation
9.4.2. Key leaders
9.4.3. Company Overview
9.4.4. Operating business areas
9.4.5. Product portfolio
9.4.6. Company Performance
9.5. Mat Foundry Group Ltd.
9.5.1. Company presentation
9.5.2. Key leaders
9.5.3. Company Overview
9.5.4. Product portfolio
9.6. Musashi Seimitsu Industry Co. Ltd.
9.6.1. Company presentation
9.6.2. Key leaders
9.6.3. Company Overview
9.6.4. Product portfolio
9.6.5. Company performance
9.7. Ningbo Jingda Hardware Manufacture Co.Ltd.
9.7.1. Company presentation
9.7.2. Key leaders
9.7.3. Company Overview
9.7.4. Product portfolio
9.8. Otics Corporation
9.8.1. Company presentation
9.8.2. Key leaders
9.8.3. Company Overview
9.8.4. Product portfolio
9.9. Sansera Engineering Limited
9.9.1. Company presentation
9.9.2. Key leaders
9.9.3. Company Overview
9.9.4. Product portfolio
9.9.5. Company performance
9.10. Tfo Company
9.10.1. Company presentation
9.10.2. Key leaders
9.10.3. Company Overview
9.10.4. Product portfolio

For more information about this report visit https://www.researchandmarkets.com/r/55ub42


        
  Shaft